Browsing from the United States? 
Bauer Vapor X4 Intermediate Hockey Skates (2023)
Something went wrong. Please try again later.
- Please Make a Selection
| Bauer Junior Hockey Skate Size Guide | ||||
|---|---|---|---|---|
| Skate Size | Foot Length (in) | Men's/Kids (US) | Women's (US) | EU |
| 1 | 8.27" | 2 | 33.5 | |
| 1.5 | 8.43" | 2.5 | 34 | |
| 2 | 8.58" | 3 | 35 | |
| 2.5 | 8.74" | 3.5 | 35.5 | |
| 3 | 8.90" | 4 | 5 | 36 |
| 3.5 | 9.09" | 4.5 | 5.5 | 36.5 |
How to Find Your Fit
Fit 1
Narrow Width
Approximate width of foot is 4 to 4.5 inches.
Low Volume
Approximate height of foot is 2 to 2.5 inches.
Fit 2
Medium Width
Approximate width of foot is 4.5 to 5 inches.
Medium Volume
Approximate height of foot is 2.5 to 3 inches.
Fit 3
Wide Width
Approximate width of foot is 5 to 5.5 inches.
High Volume
Approximate height of foot is 3 to 3.5 inches.
Things to consider
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoe sizing do not match exactly. As a general guideline, hockey skates are typically 1 - 1 ½ sizes smaller than your shoe size.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates, and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit
Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once the skates have been heat molded, the foam padding should have molded around your foot. Which will result in your skating stance pre-heat becoming the standing size (simply put, it will give your toes slightly more room in the front of the boot, and a tighter fit around your heels).
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in Inches. This measurement will correspond with the sizing charts above, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 11 inches, you would select 11.06 inches or Size 9.5)
Sizing Children for Growth Room
If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to ensure they last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based, and these measurements will not guarantee a fit that is right for you, they are merely a general guideline to follow. For the most accurate fit, we always recommend getting measured by a professional skate fitter at one of our stores***
- Level: performance
- Curv Composite: The world’s first self-reinforced, 100% thermoplastic composite material made to withstand anything the game of hockey throws at it. Get pro level support and lightweight performance with state-of-the-art materials.
- LIGHTSPEED (LS) EDGE Holder: The blade holder that’s trusted by over 80% of NHL players for a decade. This first of its kind holder features a quick release trigger to allow for fast steel replacement or service so you never have to miss a shift.
- LS PULSE SS Steel Blade: An upgraded runner core gives players more stability on the ice while helping them push their speed and acceleration
- Pro Stock Comfort Tongue: Made to give you professional feel and performance without any extra weight
- Comfort Edge: Higher quality lining around the ankles
- Asymmetrical Toe Cap: Made to minimize the negative space between your boot and your toes.
Features
- Key Upgrades: curv comp, pro stock tongue, LS pulse SS
- Quarter Package: 3D lasted curv comp
- Lining Material: sublimated with comfort edge
- Ankle Padding: memory foam
- Tongue: pro stock 40oz felt with liner
- Footbed: form fit
- Thermoformable: anaform upper
- Outsole: digi comp
- Blade holder: tuuk lightspeed edge
- Runner: LS pulse SS 10ft
| Bauer Junior Hockey Skate Size Guide | ||||
|---|---|---|---|---|
| Skate Size | Foot Length (in) | Men's/Kids (US) | Women's (US) | EU |
| 1 | 8.27" | 2 | 33.5 | |
| 1.5 | 8.43" | 2.5 | 34 | |
| 2 | 8.58" | 3 | 35 | |
| 2.5 | 8.74" | 3.5 | 35.5 | |
| 3 | 8.90" | 4 | 5 | 36 |
| 3.5 | 9.09" | 4.5 | 5.5 | 36.5 |
How to Find Your Fit
Fit 1
Narrow Width
Approximate width of foot is 4 to 4.5 inches.
Low Volume
Approximate height of foot is 2 to 2.5 inches.
Fit 2
Medium Width
Approximate width of foot is 4.5 to 5 inches.
Medium Volume
Approximate height of foot is 2.5 to 3 inches.
Fit 3
Wide Width
Approximate width of foot is 5 to 5.5 inches.
High Volume
Approximate height of foot is 3 to 3.5 inches.
Things to consider
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoe sizing do not match exactly. As a general guideline, hockey skates are typically 1 - 1 ½ sizes smaller than your shoe size.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates, and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit
Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once the skates have been heat molded, the foam padding should have molded around your foot. Which will result in your skating stance pre-heat becoming the standing size (simply put, it will give your toes slightly more room in the front of the boot, and a tighter fit around your heels).
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in Inches. This measurement will correspond with the sizing charts above, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 11 inches, you would select 11.06 inches or Size 9.5)
Sizing Children for Growth Room
If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to ensure they last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based, and these measurements will not guarantee a fit that is right for you, they are merely a general guideline to follow. For the most accurate fit, we always recommend getting measured by a professional skate fitter at one of our stores***
Customer Reviews
30-Day Return Policy
We understand it is difficult to determine how a product is going to fit when looking at it on a computer screen or mobile device. Because of this, we've simplified our return policy making it easier for you to return or exchange products you've bought from sourceforsports.ca and it starts with our no-questions asked 30-Day Return Policy.
If you are unsatisfied with your purchase in any way, you can return unused items in new condition within 30 days after purchase for a refund less the cost of return shipping (if applicable).
Clearance items and some other specified products are considered FINAL SALE and are not eligible for return unless defective. See Return Exceptions for a list of exclusions.
